RFID S Series
S series（High speed）
Inductive coupling principal suitable for factory automation environment.
- 8K byte memory capacity of Data carrier and high speed version.
- RFID system has various line-up for the connection to host device,
Equipment configuration of S series
Memory capacity and type Memory capacity and type.
| Memory type | Capacity | Writing cycle | ||
|---|---|---|---|---|
| Reading cycle | Data retention time | |||
| FRAM | 8K byte | Unlimited | Unlimited | 10 years |
Processing time of 64 byte (between Data carrier and Read/Write head)
| Read | 29ms |
|---|---|
| Write | 120ms |
Specification
Data carrier
| Type code | Size | Capacity | Memory | Metal mounting |
|---|---|---|---|---|
| S1-D011-8K | 52ｘ32ｘ11 | 8K byte | FRAM | mountable, non-flush mount |
| S1-D021-8K | 40ｘ80ｘ22 |
ID Read/Write head
| Type code | Size | Connection | Applicable ID tag | Connect to Processor |
|---|---|---|---|---|
| S3-A020-PU_ _ | Squareness : 40x40x140
|
Cable | S1-D011-8K | Cable (Terminal) |
|
S3-A020-PU_ _ S3-A030-PU_ _D |
D-sub 9pin Cable (Terminal) |
|||
| S3-A030-PU_ _D | D-sub 9pin | |||
| S3-A010-PU_ _ | Squareness : 80x118x40 |
S1-D011-8K S1-D021-8K |
Cable (Terminal) | |
| S3-A010-PU_ _D | D-sub 9pin | |||
|
S3-A010J-PU_ _ S3-A010J-PU_ _D |
S1-D021-8K |
Cable (Terminal) D-sub 9pin |
||
| S3-A020-CN | Squareness : 40x40x133 |
Connector | S1-D011-8K | By the Anntenna cable |
| S3-A030-CN | ||||
| S3-A010-CN | Squareness : 80x104x40 |
S1-D011-8K S1-D021-8K |
||
| S3-A010J-CN | S1-D021-8K |
Processor
| Type code | Interface | Number of connected Read/Write head | Remark | |
|---|---|---|---|---|
| S4-Q001 | MELSEC-Q | 2CH | ||
| S4-C001 | CC-Link | 2CH | ||
PC unit
| Type code | Unit | Remark | Remark |
|---|---|---|---|
| S3-H010 | Antenna unit | S1-D011-8K S1-D021-8K |
Read and Write information (data) of Data carrier non-contact.Supply power for operating of Data carrier. |
| S6-U001 | Processor unit | Follow to the command from PC, read data from Data carrier and write data to Data carrier. |
Antenna cable
| Type code | Figure | Cable length | Applicable processor | Connection with Processor |
|---|---|---|---|---|
| S7-A001-PU-_ _ | M12 straight | 2,5,10,15,20,25m | S4-Q001 | Cable (Terminal) |
| S7-A002-PU-_ _ | M12 angle | |||
| S7-A003-PU-_ _ | M12 straight | S4-C001 | D-sub 9pin | |
| S7-A004-PU-_ _ | M12 angle |
Copyright © B&PLUS K.K.ALL Rights Reserved