Products > Topic
 Remote System
Remote sensor system / Compact shape

We achieved wireless charging to a moving unit and transmitting signals from a moving unit.
Water/dustproof design Protection class IP67 !
The best solution for robot hands and tool hangers..

Remote Power Supply system / Wireless charging system 210W

Wireless charging achieve labor savings !
Battery replacement connectors and connection for charging is not required, I was able to achieve power saving!
Allows 24 hours of continuous operation with automatic charge!

Remote Sensor system / Flat shape

Space-saving flat shape!
Simultaneous transmission of power and signals of one sensor.
Compact flat shape ! Indicator visible from 4 directions ! Flush mountable !

Remote Sensor system / Remote terminal 24V

High-Power Terminal Unit is Now Available!
Wireless power supply 13W and signal transmission simultaneously.
16 signals transmission of laser or photoelectric sensor !

Remote Coupler system / CC-Link type
Wireless power supply and CC-Link data communication are possible by one unit of Remote coupler system/ RCD22.
  Remote Link system / Base amplifier with EtherNet/IP interface

Remote Link system transmits 64+32 I/O signals to EtherNet/IP network at the same time it supplies 24 VDC/2A power inductively.

 

  Remote Sensor system / Thermocouple J and K type

Two temperature data of connected thermocouples are transmitted wirelessly and are outputed separately as two current signals.

Remote Coupler system / DeviceNet type

Remote coupler system makes DeviceNet movable!!
RCD33E/RCD33T connect the trunk line or drop line of DeviceNet wirelessly.

  Remote Link system / Base amplifier with CC-Link interface
Remote Link system makes it possible to supply power 24V DC/2A wirelessly and simultaneously transmits 64 input and 32 output signals.
New Base amplifier RL64E-366CL connects the system to CC-Link bus directly.
  Remote Sensor system / For higher ambient temperature
RS08_A which transmits detector signals of standard DC 2-wire switches is usable under high ambient temperature 80 degree C.
Remote Sensor system / Terminal unit version 8/16 signals transmission
All the wiring of the terminal unit is connector connection.
It revents a wiring error and shortens it in a working hour.
Remote Sensor system / Detector and Transmitter cable connected type
Since a detector and a transmitter are wired by one cable,
its free from miss-wiring and decrease man-hours.
Remote Sensor system / Analog signal transmission type
RNT/RNE makes it possible touse an analog sensor on a moving part
such as a palette to detect theposition of the target.
Remote Power supply system / Power supply 24V/5A or 28V/4A
Remote Power Supply system RV/A series supplies power 24V DC/5A through air gap.
Battery charging type 28V DC/4A also available.
Remote Link system / Power supply 24V/2A and Transmit 64+32 signals
Configurating Remote Link with I/O units, RL makes it possible to simultaneously supply power to many sensors or drive units and transmit I/O signals for them..
For the interface with an external controller parallel I/O and DeviceNet are available.
Remote Sensor system / 8 detector signal transmission
Standard DC 2-wire switches such as proximity switch, magnetic switch or mechanical limit switch can be used as detectors.
Remote Coupler system / 24V DC/2A and bidirectional signal transmission
New remote Coupler system supplies power 24VDC/2A to a moving part through an air gap, simultaneously transmits 8+8 bidirectional signal.
Remote Power Supply system / Overlap coupling type
Non-contact power supply connector makes it possible to attach/detach in wet condition.
Remote Coupler system / RS-232C signal transmission
RS-232C serial data transmission and 24V DC/1A power supply through an air gap.
Remote Coupler system / CC-Link signal transmission
CC-Link data transmission and 24V DC/1A power supply through an air gap.
        
 Industrial RFID
   
Simple RF-ID! 8-bit system
クリックすると詳細を、ご覧頂けます。

Reading program is unnecessary. 8-bit system is the best way of jig or dies management.

CC-Link interface Identification Processor
クリックすると詳細を、ご覧頂けます。 The processor directly connects to CC-Link Network
  BIS M series / Cost-effective data carrier
クリックすると詳細を、ご覧頂けます。 Cost-effective data carriers for industrial application.
Flush-mountable data carrier is also available.
Identification Processor for USB interface
Usable and Easy Identification System with PC.
The driver and application sofrware is attached
USB interface Processor/ for handy programmer BIS H-4000-30
It is possible to use the processor by connecting to a USB port of a PC, install the driver and application sofrware. External power supply is unnecessary.
Mini-flag Identification System BIS C/R series
New advanced Mini-flag Identification System with 64-bit capability with the address select function.
   
   
   
Top of this page↑
Products | Company | Balluff Netowork
TKN14715
B&PLUS KK
Tel:0493-65-5771 Fax:0493-65-3171

Mail:b-plus@b-plus-kk.jp