TOP > 最新情報 > Confirming presence of work pieces on a feed-bar

Confirming presence of work pieces on a feed-bar



In the press line where feed-bar is used, type and position of the gripper are vary according to type of work pieces In the die exchanging, feed-bar also need to be changed. Exchange process has been deduced by Remote sensor system.

Previous problems

-- Cable breakages from stress. -- Time loss for connection/disconnection of the connector at changing feed-bar.

After improvement

-- Improve the efficiency in feed-bar exchange. -- Eliminated cable breakage problems. -- Eliminated water/oil trouble.

More infomation

Download PDF